ANCHOR DRILL DOCK
Give your drills and drivers a home off the workbench. The Anchor Drill Dock brings your go-to tools onto the wall and gives compatible Anchor accessories a place to connect.
Choose a 2-, 4-, 6-, or 8-drill dock. Start with the tools you use today, then build the rest of your setup around them.
Four sizes · 14-gauge steel · Expandable Anchor storage
A drill holder gives your tools a place to go. The Anchor Drill Dock also gives you a starting point for organizing the tools and accessories you use alongside them.
Keep your go-to tools in view: Give drills and drivers dedicated spots instead of stacking them on the bench or digging through a bin.
Build around the tools you use: Compatible Anchor holders bolt to the dock’s end panels using a shared 3-inch hole pattern. Add the storage that makes sense for your work.
Choose steel construction: Formed and welded 14-gauge sheet steel with a matte-black, fine-texture powder coat keeps the design straightforward and consistent with the Anchor line.
Start with the number of drills and drivers you want within reach, then consider the wall space you have available. Leave room for the accessories and charging setup you may want beside them.
The largest Drill Dock option, with room for eight tools across two levels.
Choose for the tools you want to store, not just the number you own. Check the dock dimensions and tool fit before ordering.
Once your drills have a home, bring the tools you use with them into the same area. Build a setup around the way you work rather than filling the wall with storage you do not need.
Add storage to the dock: Choose compatible Anchor holders for items such as your tape measure, bit case, or screwdrivers. The dock’s end-panel mounting pattern is where those accessories connect.
Bring charging alongside: Pair the dock with an Anchor Battery Charging Station to keep your charging setup nearby. The Charging Station mounts separately to the wall; it does not bolt to the Drill Dock.
Keep building your setup: Explore the rest of the Anchor line as your storage needs change. Check each accessory’s mounting details when planning its position.
Drill Dock + separate wall-mounted Charging Station
The Drill Dock mounts directly to the wall, with end panels that accept compatible Anchor accessories. Review the dimensions and mounting information before deciding where it will go.
Construction
Formed and welded 14-gauge sheet steel
Finish
Matte-black, fine-texture powder coat
Mounting
Wall-mounted
Accessory connection
Shared 3-inch mounting pattern on the end panels
Sizes
2-, 4-, 6-, and 8-drill options
Included mounting hardware
2½-inch lag screws
Start by counting the drills and drivers you want on the wall together. Choose the corresponding capacity, then check the dock dimensions and leave space for any accessories you plan to add.
You can start with a Drill Dock on its own. Add compatible holders and a separate charging station as you decide what else belongs in your setup.
No. The Drill Dock stores your tools; the separate Anchor Battery Charging Station provides a wall-mounted place for your charging setup.
No. It mounts independently to the wall, so you can position it above or beside the dock.
Compatible Anchor holders attach to the dock’s end panels using the shared 3-inch hole pattern. Check each accessory’s mounting details, since some Anchor products mount independently to the wall.
Check your tool dimensions against the Drill Dock’s specifications and engineering drawings before ordering. If you are unsure, contact us with the tool model you want to store so we can help you check.
Yes, please follow the installation instructions and confirm that the mounting method is appropriate for your wall before installing.
Get your drills off the bench and into a setup you can build around. Choose your Drill Dock, then add the Anchor storage that fits the way you work.
